twitterlinked inblog5you tuberss

  • Events
  • Completed Webinars

Completed Webinars

Product Line Engineering with Cameo Systems Modeler and pure::variants

Thursday, 23 March 2017
03:00 PM GMT, 10:00 AM CDT, 11:00 AM EDT, 04:00 PM CET
Description

Nowadays systems are growing in complexity, and managing them becomes exceedingly difficult. The complexity rises even further, when the system or product has many variations, for example, coffee machine may have multiple editions with different coffee brewing options. Having multiple system models of each product variation is very difficult to maintain. Therefore, a “150% model” of the system is developed to describe every possible variation. The Product Line Engineering (PLE) integration is then used to “cut” the model to a specific variant realization.

This webinar overviews the basics of Product Line Engineering, but mostly focuses on demonstrating the integration between Cameo Systems Modeler and pure::variants from pure systems.

The session demonstrates
  • Creating feature and product model in pure::variants
  • Linking the product model to the system model in Cameo Systems Modeler
  • Defining specific variation points in the system model
  • Realizing a specific variant (product) of the system model

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Darius Petrauskas, Solution Architect at No Magic Europe
Product Line Engineering with Cameo Systems Modeler and pure::variants

Darius Petrauskas is a solution architect at No Magic working with Software Engineering and Enterprise modeling solutions, also is an OMG Certified UML professional. The main focus during his studies and career was on business analysis, process modeling/simulation and designing supporting Information Systems and Embedded solutions.

Before joining No Magic in 2016, he acquired a substantial multinational experience on operational analysis and improvement, consulting, project management and designing various software and hardware systems. Tangible amount of his time was devoted to scientific publishing and patent applications.

At No Magic Darius does training for local and international public and private sector enterprises such as Lithuanian Police, Lithuanian Post, Lithuanian Registry Center. He is a frequent guest speaker at Kaunas University of Technology where he holds a Bachelor’s in Information Systems Design.

C/C++ Code Generation for Embedded Devices

Partner-led By: LieberLieber
Wednesday, 08 March 2017
03:00 PM GMT, 09:00 AM CST, 10:00 AM EST, 04:00 PM CET
Description

The well known LieberLieber Embedded Engineer solution is now available for Cameo Systems Modeler/MagicDraw too. Generating code from UML to be executed on embedded targets is now possible! Yet the best feature of the package is the ability to “debug” UML behavior on real devices with hardware debuggers.

The session demonstrates
  • Why should I use it?
  • Code Generation (C/C++)
  • UML Debugging
  • How does it compare to other solutions?

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Daniel Siegl, CEO at LieberLieber
C/C++ Code Generation for Embedded Devices
Daniel has been involved with model-based engineering since 2000. He first experienced model-based engineering with Together, and then moved on to other tools!
He gained deep experience handling critical software projects around the world in the IT, apparel and footware industries.

In 2006, Daniel joined European-based LieberLieber, the Model Engineering Specialists. Three years later, he became CEO, and in his role as developer of international business he also became CEO of LieberLieber Software Corp, based in Houston, TX, in 2014.

Daniel is heavily involved with LieberLieber's Automotive and Logistics clients, helping them to build tools to develop their products in a more efficient way. He is passionate about UML/SysML, embedded systems, and industry standards like AUTOSAR.

He is an experienced speaker, a founding member of the Enterprise Architect User Group and represents LieberLieber at the Object Management Group.

Daniel lives with his family in Vienna, Austria.

Webinar 9 2016 - Introduction to Unified Architecture Framework (UAF)

Thursday, 15 December 2016
03:00 PM GMT, 9:00 AM CST, 10:00 AM EST, 04:00 PM CET
Description
Unified Architecture Framework (UAF) is a structured approach for managing the complexity of systems of systems engineering in the organization in different levels of abstraction. Abstraction levels allow the definition of strategy, operations (requirements), and alternative tactics (solutions) needed to implement operational scenarios.
 
UAF provides an infrastructure to ensure complete and correct specification of systems (including human resources) integration using various techniques such as engineering analysis, traceability, and metrics. Some of these techniques are covered in the webinar which demonstrates complete workflow of systems of systems engineering using UAF Framework. The workflow includes the activities of defining capability requirements, specifying operational scenarios, providing several possible solutions for particular operational scenario, and managing projects portfolio required to implement the selected solution.
The session demonstrates
  • UAF introduction
  • UAF views and models
  • Complexity management using different abstraction levels
  • Coverage analysis
  • Impact analysis
The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.
The session is hosted by Edita Mileviciene, Cameo Enterprise Architecture Product Manager at No Magic Europe
Webinar 9 2016 - Introduction to Unified Architecture Framework (UAF)
Edita is the Cameo Enterprise Architecture (CEA) Product Manager at No Magic. She has been with No Magic for fifteen years, and has a large expertise in software and systems engineering, model-based enterprise architecture solutions, and business process modelling techniques.
 
Edita has conducted numerous trainings and workshops in Europe, gave various presentations and talks at international conferences.
 
Edita has a master degree from Kaunas University of Technology (Lithuania), and also is OMG Certified UML, Systems Modelling, and Business Process Management professional.

Webinar 8 2016 - Timing and Duration Analysis

Tuesday, 22 November 2016
03:00 PM GMT, 09:00 AM CST, 10:00 AM EST 4:00 PM CET
Description
During this webinar, you will learn how MagicDraw with Cameo Simulation Toolkit can be used to verify how particular system design satisfies time, duration, or performance requirements.
The session demonstrates
  • Timing concepts, different clocks, time steps
  • Time units
  • Time and duration constraints
  • Duration simulation, parallel processes
  • Timelines

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Nerijus Jankevicius, MBSE Product Manager at No Magic Europe
Webinar 8 2016 - Timing and Duration Analysis

Nerijus Jankevicius is a Product Manager at No Magic Inc, managing and envisioning the Model-Based Systems Engineering environment development. During 19 years at No Magic, he was actively and deeply involved into development of MagicDraw, SysML plugin and Cameo Simulation Toolkit, helping to make them one of the most recognized MBSE solutions on the market.

During more than 10 years, Nerijus also contributed to UML and SysML standards working groups at Object Management Group (OMG), becoming one of the leading UML/SysML experts and consultants, one of the first OMG Certified Advanced UML 2.0 Professionals in Europe.

Nerijus delivered workshops and trainings in Systems Modeling and Model Based Systems Engineering (MBSE) at major facilities in research and industry like NASA/JPL, Bombardier Transportation, GE Transportation, Kongsberg Defense & Aerospace, Pratt & Whitney Canada, BAE Systems, MITRE and others, gave various presentations and talks at international conferences.

Webinar 7 2016 - Total Mass, Cost, and Power Rollups

Thursday, 20 October 2016
03:00 PM BST, 9:00 AM CDT, 10:00 AM EDT, 04:00 PM CEST
Description
The rollup calculations are among the most common use cases in systems engineering. System modelers want to calculate total mass, cost, power, or another system dimension, based on individual values of all the parts in the model. During this webinar, you will learn how to perform different kind of rollup calculations in the MagicDraw model with Cameo Simulation Toolkit.
The session demonstrates
  • Introduction to rollup analysis
  • Rollup patterns
  • Rollup Pattern Wizard
  • Applying static rollup pattern to model
  • Applying dynamic rollup pattern to model
The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.
The session is hosted by Zilvinas Strolia, Solution Architect at No Magic Europe
Webinar 7 2016 - Total Mass, Cost, and Power Rollups
Zilvinas is a Solution Architect at No Magic Europe. His expertise area is model-based systems engineering (MBSE) with special focus on model execution.
 
Zilvinas has an engineering degree from Kaunas University of Technology (Lithuania) and almost 10 years of work experience in this field. He also holds the OMG-Certified Systems Modeling Professional (OCSMP) certificate.
 
Zilvinas is responsible for consulting and delivering the solutions to customers. He occasionally writes papers and produces training material (slides, samples, practical assignments).