twitterlinked inblog5you tuberss

  • Events
  • Completed Webinars

Completed Webinars

Connecting SysML with PLM/ALM, CAD, Simulation, Requirements, and Project Management Tools

Partner-led By: Intercax
Thursday, 05 May 2016
03:00 PM GMT, 04:00 PM BST, 10:00 AM CDT, 11:00 AM EDT, 05:00 PM CEST
Description
A driving force for Model-Based Systems Engineering (MBSE) has always been the goal of a single, unified model representing the system, from which all the required documents and views could be derived. The reality is that engineering organizations store system data across a range of tools and repositories from multiple vendors. A SysML model may be an effective high-level roadmap and clearinghouse for the Total System Model, but it must be robustly connected at a fine-grained level to all the other models in other tools if it is to support the MBSE vision.
The session demonstrates
Syndeia is an existing Intercax product which supports a robust network of connections between models in different tools. In our presentation, we will demonstrate a variety of specific use cases involving MagicDraw SysML connecting with PLM/ALM, CAD, simulation, requirements and project management tools. The role of standards, including REST, OSLC, FMI and STEP, in creating such connections will be addressed. Finally, some perspectives on the future of MBSE and Syndeia’s positioning within that future will be offered.
The session is hosted by Dr. Dirk Zwemer, President at Intercax LLC
Connecting SysML with PLM/ALM, CAD, Simulation, Requirements, and Project Management Tools

Dr. Zwemer received his undergraduate degree from MIT, his PhD (in Physical Chemistry) from U.C. Berkeley and his MBA from Santa Clara. His career has primarily been in the commercial electronics industry, including Bell Labs, ITT, SRI International and several start-ups. His primary focus at Intercax is in applying the company’s technology to real industry problems ranging from aerospace to consumer products. He has also taught SysML, in collaboration with Georgia Tech, to over 3000 students. He is a member of INCOSE and holds Level 4 SysML Model Builder – Advanced certification from OMG.

Intercax, a No Magic partner since 2008, supports organizations adopting best practices in Model-Based Systems Engineering with standard and custom software, consulting and training. Our products working with MagicDraw SysML include Syndeia, a platform for integrated MBE/MBSE, and ParaMagic, a SysML parametric solver.

Webinar 3 2016 - Requirements Change Management in Integrated Environment

Thursday, 14 April 2016
03:00 PM GMT, 04:00 PM BST, 10:00 AM CDT, 11:00 AM EDT, 05:00 PM CEST
Description
Requirements management is the major starting point of systems engineering. SysML allows transferring requirements and storing them in the model. However, in many cases requirements are created or managed in an external source. That’s why tools’ interoperability and change management are so important for efficient project development.
The session demonstrates
  • Requirements import and update using various standards and tools:
    • Microsoft Excel and Comma Separated Value format
    • Requirements Interchange Format and OMG standard (ReqIF)
    • Open Services for Lifecycle Collaboration (OSLC)
    • Cameo DataHub (for interoperability with Rational DOORS)
  • Capabilities for requirements change management:
    • Suspect links
    • Comparison at element level
    • Review and commenting (using Cameo Collaborator)
    • Workflows (using Cameo Collaborator)
    • Forma approvals (using Cameo Collaborator)

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Dr. Saulius Pavalkis, Director, Product Development at No Magic, Inc.
Webinar 3 2016 - Requirements Change Management in Integrated Environment

Dr. Saulius Pavalkis is the director of products development at No Magic, with responsibilities for multi-domain solutions development, strategic technical partnerships, and global customer support. In the past he has worked as an analyst in the MagicDraw R&D team for over 10 years. His major expertise areas are model-based requirements engineering, software and systems design, MBSE, PLM, including architectures of advanced MBSE solutions. Saulius is the owner of the Cameo Requirements Modeler product. Saulius holds a Ph.D. from Kaunas University of Technology (KTU) in models traceability. He also holds multiple professional certificates: OMG-Certified Systems Modelling Professional, OMG-Certified UML Professional, OMG-Certified Expert in BPM, and ITIL V3. Saulius has written multiple research and practical articles in model-based design. Saulius is the founder and chief editor of a modelling community blog (blog.nomagic.com) dedicated to sharing practical model-based engineering experience. Saulius was also a part-time researcher at KTU, working on EU-funded projects on different OMG standards integration.

Webinar in French - Choisir une démarche MBSE: Quelques pistes de bonnes pratiques en Ingénierie Système

Partner-led By: PRFC, membres de l'association SysML France (SysML France Association members)
Monday, 21 March 2016
03:00 PM GMT, 10:00 AM CDT, 11:00 AM EDT, 04:00 PM CET
Description
Aujourd'hui, l'ingénierie dirigée par les modèles, ou Model Based System Engineering (MBSE), est pleinement supportée par la notation SysML (Systems Modeling Language).

Cependant SysML est ni un cadre d'architecture, ni une méthode. Cela ouvre des discussions sur la façon de structurer le modèle, quels diagrammes construire, quels artefacts sont à livrer et dans quel ordre. Chaque entreprise gère cette problématique différemment. Il est primordial de conserver la capacité à échanger, la capacité de communiquer avec d'autres équipes, tout en minimisant les frais généraux de personnalisation des outils et en optimisant le besoin en formations spécifiques. En outre, les modèles peuvent devenir difficiles à intégrer et à réutiliser.

Dans cette session, nous analyserons de manière pragmatique quelques bonnes pratiques puis les visualiserons par des exemples dans l'outil Cameo Systems Modeler.

In English

Nowadays MBSE is enabled by Systems Modeling Language (SysML). However SysML is neither an architecture framework nor a method. This opens discussions of how to structure the model, what views to build, which artifacts to deliver and in what sequence. Every company deals with this issue differently. Organizations not complying with the standardized approach end up having differently structured models with different set of views. It results in the loss of capability to inter-exchange, loss of capability to communicate with other teams, overhead in tool customization, and specific trainings need. Moreover, the models become impossible to integrate and reuse.
In this session, we will analyze certain good practices and demonstrate them by examples in the Cameo Systems Modeler tool.

The session demonstrates
  • Les pièges les plus couramment rencontrés en MBSE : comment les éviter ?
  • Rappel des principaux concepts et diagrammes SysML
  • Démonstration des liens entre éléments du modèle dans les différents points de vue
  • Visualisation d’une étude de cas de modélisation simple mais cohérente
 In English
  • Introduces MBSE pitfalls and explains how to avoid them
  • Explains major SysML concepts and diagrams
  • Shows how to trace model elements in different views
  • Shows a consistent modeling case study

The presentation takes about thirty minutes and the question-answer section – about five. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Olivier Casse, Independent Consultant and Representative of SysML France Association.
Webinar in French - Choisir une démarche MBSE: Quelques pistes de bonnes pratiques en Ingénierie Système
Cette session sera animée par Olivier CASSE, consultant indépendant et représentant de l'association SysML France.

Olivier Casse maitrise la pratique de l'Ingénierie Système notamment la gestion des exigences, la spécification par la modélisation et leur traçabilité.

Il a travaillé pour de nombreux éditeurs internationaux d’outils de modélisation et est devenu ainsi expert depuis plus de 25 ans en outils pour le développement de logiciels embarqués: modélisation, simulation, génération de code, etc.

Il anime régulièrement des formations, des prestations de conseil et est un conférencier occasionnel.

In English

Olivier Casse in an independent consultant and representative of the association SysML France. He has mastered the practice of systems engineering including requirements management, specification, and traceability.

He has worked for many international publishers and modeling tools for over 25 years to become an expert in tools for embedded software development: modeling, simulation, code generation, etc.

He regularly conducts training, consulting and is an occasional lecturer.

Webinar 2 2016 - Fundamentals of Model-Based Systems Engineering (MBSE)

Thursday, 17 March 2016
03:00 PM GMT, 10:00 AM CDT, 11:00 AM EDT, 04:00 PM CET
Description
The topic addresses fundamental concepts of model-based systems engineering (MBSE) in practice. It covers language, method, and modeling tool of MBSE, mainly focusing on the last one.
The session demonstrates
  • UI of the modeling tool
  • Creation of a new project and presentation artifacts (diagram, table, matrix, and element)
  • Difference between symbol and element
  • Difference between element containment and composition
  • Creation of relationships between elements
  • Navigation in the model
  • Difference between element definition and usage
  • Difference between element type and instance specification

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Aiste Aleksandraviciene, Solution Architect at No Magic, Inc.
Webinar 2 2016 - Fundamentals of Model-Based Systems Engineering (MBSE)
Aiste has been with No Magic, Inc. since 2010. Currently she is a Solution Architect and takes responsibility for organizing webinars, producing and maintaining training material as well as educating No Magic clients on modeling languages, methods, and tools via customer support, social networks, etc. Her expertise area is model-based systems engineering (MBSE) with special focus on managing system requirements. Also, Aiste actively collaborates with her colleagues in writing papers to promote the MBSE culture in systems engineering.
Before joining the Solution Architects team, Aiste worked as the Documentation Manager and has over 5 years of practice as a technical writer. While producing technical documentation of No Magic products, she gained a lot of experience of modeling with UML, SysML, UPDM, etc., working in collaborative environment (Teamwork Server, CEDW), publishing and reviewing models on the web (Web Portals, Cameo Collaborator). She has initiated the migration from printable documentation formats to the online wiki and is a founder of http://docs.nomagic.com.

How to Build Custom Model Interchange Solutions with Cameo Workbench

Partner-led By: Sodius
Thursday, 10 March 2016
03:00 PM GMT, 09:00 AM CST, 10:00 AM EST, 04:00 PM CET
Description

Cameo Workbench is an open environment optimized for getting more out of your models. With Cameo Workbench, you can create customized exchanges between models, consistency checkers across designs, or specific code, XML, or text file generators.

The session demonstrates
  • How to navigate in models to determine the structure of the information to generate/transform.
  • How to generate code based on an input model using a text template.
  • Cameo Inter-Op/Workbench, an open environment : Customer experience with ACORD.

The presentation takes about fifty minutes and the question-answer section – about ten. The audience are able to submit questions in a written form throughout the webinar.

The session is hosted by Valéry Rault-Vigoureux, Product Manager at Sodius
How to Build Custom Model Interchange Solutions with Cameo Workbench

Valéry Rault-Vigoureux is a Product Manager at Sodius, with more than twelve years of experience in software development.

As a Product Manager, she is responsible for the Cameo Inter-Op and Cameo Workbench products since 2011.

Valéry has a large experience in Model Driven Engineering, working on model transformation, model migration, custom code generation and automated document production from models.

She also participates in large projects for government defense agencies, focused primarily on defense architecture (DoDAF, NAF) exchange and conversion.